jaenext.blogg.se

1. #PROLIFIC USB TO SERIAL COMM PORT CODE 10 DRIVERS#
2. #PROLIFIC USB TO SERIAL COMM PORT CODE 10 DRIVER#
3. #PROLIFIC USB TO SERIAL COMM PORT CODE 10 PC#

#PROLIFIC USB TO SERIAL COMM PORT CODE 10 DRIVER#

Why doesn't my new driver work any longer? This message appears if the radio is not turned ONī) "Error has Occurred, Could not open Com Port x"Įach USB slot is connected to a separate com port to avoid conflict.

Programming cable is not being recognized.Ī really hard push to snap in that last 1/16Ĭable's plug side and edge may be required.

#PROLIFIC USB TO SERIAL COMM PORT CODE 10 PC#

The driver version shown should be v3.2.0.0ġ2) Remove the USB programming cable from your PC and then plug the USB programming cable back in. You can check that the correct version is installed by double-clicking on the Prolific entry in device manager and selecting the Driver tab. You should now see a properly installed Prolific driver in Device Manger. You should get a prompt saying that the driver was installed successfully. "Prolific USB-to-Serial Comm Port Version: 3.2.0.0 ".

#PROLIFIC USB TO SERIAL COMM PORT CODE 10 DRIVERS#

"Let me pick from a list of device drivers on my computer"ġ0) At the third Update Driver Software prompt, scroll down and selectġ1) At the fourth Update Driver Software prompt, select "Browse my computer for driver software".ĩ) At the second Update Driver Software prompt, In 'Ports (COM & LPT)' the 'Prolific USB-to-Serial Comm Port (COMx)' willħ) Right-click on the entry with the error to open a window and selectĨ) At the first Update Driver Software prompt, select The recommended Drivers and Info can be found at the This driver for Win XP can be found here: If you are using Win XP, the Prolific driver Prolific Driver 3.2.0.0 recommended for Vista, Win7/8/10 See step 7 in the "Installing the Backdated Prolific PL-3203 Driver" section below. Note: If you recently upgraded to Win10 and the V3.2.0.0 driver was previously installed on your computer, you will only need to select it again. If Windows does not automatically load the proper driver, a caution If this occurs, you Must backdate your driver to 3.2.0.0 It was done to prevent use of the cloned chip. The cable is inserted into the radio, the transmitter will turn on. This When opening Device Manager, the Yellow Caution Triangle may not appear, however, when

Windows may attempt to automatically load the Prolific driver 3.6.xx.xxx when inserting your cable. The last compatible Prolific driver was v3.3.2.105. The latest driver installed by Windows (Vista, 7, 8.1 and 10) is not compatible with these chips. Nearly every programming cable that is detected by Windows as having a Prolific chip was manufactured with an unauthorized or cloned copy of the Prolific PL2303HXA chip. Not, the driver and procedure can be found at this Link.ĭrivers for the Silicon Labs chipset (CP210x) should alsoĭownload automatically.

The driver should also download automatically. Many Baofeng and generic programming cables are shipping with the WCH chipset (CH340/341). Not all provided CDs come with the correct drivers.īy using Windows Device Manager, you should easily be able to determine whichĬables with FTDI chipset (FT232R) will automatically download the Not all cables load the correct driver automatically. Programming cable Must have the correct driver installed